Sure-Dry Before & After Photos

Before:
An old farmhouse in Winneconne showed classic signs of structural stress: a block/stone basement wall with stair-step and horizontal cracking, slight inward bowing, bouncy first-floor rooms, and makeshift wood posts with stacked shims under the main beam.

After:
We installed the PowerBrace™ wall repair system to stabilize the failing foundation wall and added SmartJack® adjustable steel supports under the beam, set on engineered footings and tightened to restore bearing and reduce floor deflection.

The wall is now stabilized and the floors are level and solid, protecting the home’s structure for the long term.

Before:
A homeowner in Winneconne saw water along the wall–floor (cove) joint after storms, plus elevated humidity and a musty odor that lingered in the living space. With an older pump, they also worried about reliability during power flickers.

After:
We installed WaterGuard® interior perimeter drainage to intercept seepage at the cove joint and route it to a TripleSafe® sump system (primary, secondary, and battery-backup pumps under a sealed lid with alarm). To stabilize moisture in the air, we added a SaniDry™ dehumidifier set to maintain ~45–50% RH with a dedicated drain.

Now the basement stays clean, dry, and comfortable year-round—with dependable pumping during outages and steady humidity for better air quality.

Before:
A homeowner in Winneconne had a settled garage floor slab. The concrete dropped near the overhead door, leaving a lip at the threshold, widening cracks, and gaps along control joints that let water and road salt seep beneath the slab.

After:
We injected PolyLevel® beneath the garage floor to fill voids and precisely lift the slab back to a uniform, garage-door–tight seal. We then sealed control joints and active cracks with NexusPro®, installing backer where needed and finishing with color-match sand for a clean look.

The garage floor is now level, the door seals properly, and joints are protected against water intrusion and freeze–thaw damage.

Before:
A homeowner in Winneconne had a small, low-clearance crawl space beneath the front entry. Exposed soil and rim-joist air leaks led to musty odors, chilly floors in the foyer, and seasonal humidity that left light condensation on wood.

After:
We installed CleanSpace® to encapsulate the floor and walls (wrapping piers and sealing all seams), insulated the walls with SilverGlo® rigid foam, and air-sealed the rim joists and penetrations using RimTight™.

Now the crawl space is dry, sealed, and insulated—improving comfort at the entry, reducing odors, and helping the home hold a healthy humidity level.

Before:
A homeowner in Winneconne had a damp, musty crawl space with signs of wall movement: hairline/stair-step cracks and slight inward lean on a perimeter wall. Exposed soil drove humidity and odors into the living space, and the floors above felt cold—especially near the entry.

After:
We stabilized the problem wall with GeoLock® wall anchors set in stable soils beyond the backfill. Then we encapsulated the crawl with CleanSpace® (floor, walls, wrapped piers), insulated the walls with SilverGlo® rigid foam, installed a TripleSafe® sump system for redundant pumping protection, and added a SaniDry™ Sedona® dehumidifier set to maintain ~45–50% RH.

Now the crawl space is secure, dry, and insulated—improving comfort, air quality, and long-term protection for the home.